Active line array subwoofer — a single 18″ woofer with 4″ voice coil reaching down to 35 Hz at 132 dB, in a rugged plywood enclosure for a flyable, seamless low-end extension of your main hangs. Onboard DSP handles crossover, tuning and driver protection.
| Type | Line array subwoofer system |
| Frequency response | 35 – 300 Hz (±3 dB) |
| Power capacity | 600 W RMS / 2400 W peak |
| Sensitivity | 103 dB (1 W @ 1 m) |
| Max SPL | 132 dB |
| Driver | 1× 18″ woofer, 4″ voice coil |
| Nominal impedance | 8 Ω |
| Connectors | 2× speakON NL4MP |
| Enclosure | Plywood |
| Finish | Textured high-density polyurethane coating |
| Dimensions (W×H×D) | 22.1 × 22.7 × 27.2 in |
| Net weight | 122 lb |
| Gross weight | 131 lb |
Low end is the emotion of live sound. Done right, you never notice the box — only the impact.
Everyone remembers the kick in the chest. Nobody remembers the subwoofer that produced it — and that's exactly the point. The W-181BP was built to deliver low end that lands as feeling, not noise: fast, tuneful, and there the instant the transient asks for it.
Loose bass smears every beat that follows it. A cabinet and port tuned to stop as sharply as they start keep kick, bass and floor-toms distinct, so the low end drives the groove instead of drowning it. Control is what separates a professional sub from a loud one.
Long-excursion loading and a low-turbulence port let the enclosure move the air a room actually needs without the port noise and compression that give big bass a bad name — headroom that stays composed when the set peaks.
Fly them or ground-stack them, run them cardioid to pull energy off the stage, and cross them to a hang of W-110BP — our engineers phase-align the whole system so the handoff is seamless.
Tell us the room, the SPL target and the budget — our engineers will spec a complete system and send a quote within 24 hours.
Request a Quote